- Edmonton Stock: 2
EMT set-screw coupling · 2 in · steel · concrete-tight when taped · Hubbell TradeSelect SKS200
2 in steel EMT set-screw coupling for joining two lengths of EMT conduit in dry locations. Commonly used for commercial and industrial raceway runs where a steel coupling and taped concrete-tight connection are required.
What this product is for
This 2 in steel EMT set-screw coupling is used to join two lengths of electrical metallic tubing (EMT) in dry locations. It is intended for raceway installations where electricians need a straightforward steel coupling for standard EMT runs.
Use for
Use for connecting 2 in EMT in commercial, institutional, and light industrial installations, including exposed or concealed dry-location conduit runs. It is commonly selected where field assembly speed matters and where a taped concrete-tight connection is acceptable.
Avoid for
Avoid using this coupling for wet locations, corrosive environments, or applications requiring a listed raintight fitting unless the installation method and fitting listing specifically allow it. Do not use it as a threaded rigid or IMC coupling.
Best for
Best for electricians installing 2 in EMT who want a steel set-screw coupling matched to standard EMT systems. It suits service work, tenant fit-ups, and new construction where dry-location EMT is specified.
Installed in
Typically installed in commercial buildings, schools, warehouses, utility rooms, and industrial interiors. For 2 in trade size, this fitting is commonly chosen on larger branch circuit, feeder, or equipment raceway runs where EMT is already specified.
Why this product exists
Set-screw EMT couplings provide a practical way to join conduit without threading. This style helps reduce installation time on standard EMT runs while maintaining a secure mechanical connection. Where concrete-tight performance is needed, manufacturer literature indicates the connection is concrete-tight when taped.
Compared with similar products
Compared with compression EMT couplings, a set-screw coupling is typically faster to install and commonly used in dry indoor work. Compression couplings are often preferred where a more robust concrete-tight connection is required without relying on taping. As a rule of thumb, choose the fitting style that matches the project specification, environment, and inspection requirements. Actual suitability depends on installation conditions and local electrical code.
Specifications
- Product type: EMT set-screw coupling
- Trade size: 2 in
- Approximate metric size reference: 53 mm
- Material: Steel
- Conduit type: EMT
- Installation location: Dry locations
- Connection style: Set-screw
- Concrete-tight: Yes, when taped
- Certification: cUL listed
- Typical application: Join two ends of 2 in EMT conduit
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 8
EMT Compression Coupling · 2 in Trade Size · Zinc Die Cast · Hubbell CKZ200
CKZ200
13 – Loyalty Rewards- Edmonton Stock: 12
- Edmonton Stock: 273
- Edmonton Stock: 11
- Edmonton Stock: 235
- Edmonton Stock: 117
