- Edmonton Stock: 4
:
from
to
Clear
Clear
EMT compression connector · 3 in trade size · zinc die-cast · Bridgeport Fittings CCZ300
SKU: CCZ300
Compression connector for terminating 3 in EMT to a box or enclosure in commercial and industrial installations. Zinc die-cast construction with concrete-tight and raintight performance helps provide a secure connection where moisture resistance is required.
Delivered to you by Sep 12 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 3 in EMT compression connector is used to bond electrical metallic tubing to a box or enclosure. It is intended for trade installations where a compression-style termination is preferred for a secure mechanical connection.
Use for
Use for 3 in EMT runs in commercial, industrial, and institutional work, including indoor locations and outdoor locations where a raintight fitting is required. It is commonly selected when terminating large EMT into cabinets, pull boxes, wireways, and enclosures.
Avoid for
Avoid using this connector on conduit types unless the specific listing permits it. If the installation calls for rigid conduit fittings, hazardous location fittings, or insulated throat protection, choose the correct listed fitting for that application.
Best for
Best for electricians and contractors needing a 3 in compression EMT connector with zinc die-cast construction and Canadian-listed concrete-tight and raintight suitability. It is a practical choice for larger conduit terminations where secure fit and weather resistance matter.
Installed in
Typically installed in service rooms, mechanical rooms, commercial tenant improvements, industrial facilities, and exterior-rated EMT terminations. For large raceways, a rule of thumb is to confirm box and knockout sizing early so there is enough working space for locknut tightening and conductor pull layout.
Why this product exists
Compression connectors are used to terminate EMT cleanly at an enclosure while helping maintain mechanical retention and environmental sealing. Compared with set-screw styles, compression fittings are commonly chosen where concrete-tight or raintight performance is needed.
Compared with similar products
This model is a connector, not a coupling. A connector joins EMT to a box or enclosure, while a coupling joins two lengths of conduit together. Buyers should also distinguish between standard and insulated-throat versions depending on conductor protection requirements.
Typical guidance only: fitting selection depends on conduit type, enclosure entry, conductor type, and local electrical code. Actual suitability depends on the complete installation.
Specifications
- Product type: EMT compression connector
- Trade size: 3 in (76 mm)
- Application: Bond EMT conduit to box or enclosure
- Material: Zinc
- Construction: Die-cast
- Connection style: Compression
- Listing: CSA listed and UL listed
- Performance: Concrete-tight and raintight
- Manufacturer part number: CCZ300
- Brand: Bridgeport Fittings
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Set Screw EMT Coupling · 3 in · Steel · Dry Location · Hubbell SKS300
SKS300
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory11 – Loyalty RewardsEMT Compression Coupling · 3 in Trade Size · Die-Cast Zinc, Concrete-Tight/Raintight · Bridgeport Fittings 267-DC
CKZ300
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory38 – Loyalty Rewards
