Infrared Patio Heater · 4000W 240V · Single Element, Biscuit Finish · Infratech W-4024-SS-BI
What this product is for
This electric infrared patio heater is designed for outdoor and indoor locations where directional radiant heat is preferred over forced air. It is suited to patios, restaurant seating areas, covered decks, vestibules, and similar spaces that need focused 240V electric heat.
Use for
Use for residential patios, commercial outdoor seating, covered terraces, and other installations where a 4000W single-element heater provides the required heat concentration. The biscuit housing is selected where a lighter finish is preferred for architectural integration.
Avoid for
Avoid using this heater where supply voltage does not match 240V, where mounting clearances cannot be maintained, or where broad-area heating is needed without proper heater layout. It is not a substitute for a full space-heating design in open, high-wind environments.
Best for
Best for electricians and contractors specifying a long-body radiant heater for larger patio zones, covered outdoor hospitality areas, and projects where a single-element Infratech W-Series unit fits the mounting plan.
Installed in
Typically installed in covered patios, pergolas, restaurant patios, balconies, garages, workshops, and other approved indoor or outdoor locations. The heater body is approximately 61.25 in (1.56 m) long and commonly used where mounting height and throw need more output than smaller residential units.
Why this product exists
This model provides concentrated radiant comfort heat without moving air, making it useful for outdoor living and commercial seating areas where convective heat is less effective. A 4000W 240V format gives contractors a common higher-output option within the W-Series single-element range.
Typical guidance: at 240V, 4000W draws about 16.7A, so branch circuit and control selection should be matched accordingly. Actual installation requirements depend on local electrical code, controls, continuous load treatment, and manufacturer instructions.
Compared with similar products
Compared with lower-wattage patio heaters, this 4000W model is generally chosen for larger zones or higher mounting conditions. Compared with dual-element models, a single-element heater offers a simpler format when staged output is not required. Biscuit is a finish option; other W-Series variants are available in different colours and materials.
Specifications
- Brand: Infratech
- Manufacturer part number: W-4024-SS-BI
- Series: W-Series
- Product type: Single-element infrared patio heater
- Wattage: 4000W
- Voltage: 240V
- Current: 16.7A
- Length: 61.25 in (1.56 m)
- Approximate dimensions: 61.25 x 8 x 3 in (1556 x 203 x 76 mm)
- Finish: Biscuit
- Application: Outdoor and indoor radiant comfort heating, subject to installation instructions
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.