- Edmonton Stock: 3
Subfeed Lug Kit · 200A · 2-Pole Plug-In for PowerMark Gold Load Centers · ABB THLK2200
200A 2-pole plug-in subfeed lug kit for ABB / legacy GE PowerMark Gold load centres. Used to supply a downstream panel from a compatible load centre; check panel compatibility and conductor range before ordering.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
The THLK2200 is a 200A, 2-pole plug-in subfeed lug kit used in compatible ABB legacy GE PowerMark Gold load centres. It provides a field-installed connection point for feeding a downstream panel or other approved distribution equipment from the load centre.
Use for
Use for adding a subpanel feed from a compatible PowerMark Gold load centre where a 200A subfeed lug kit is specified. Common applications include residential service upgrades, garage or basement subpanels, and light commercial panel expansion where the panel schedule and load calculation support the installation.
Avoid for
Avoid for non-compatible load centres, applications requiring a branch breaker instead of lugs, or installations where the panel labelling does not list this kit. Do not assume fit across all GE or ABB panels; this kit is listed specifically for PowerMark Gold series applications.
Best for
Best for electricians needing a compact factory accessory for subfeeding from an existing compatible load centre without changing the entire panel. It suits service and renovation work where maintaining listed panel accessories matters.
Installed in
Installed in compatible indoor load centres and panelboard applications using ABB legacy GE PowerMark Gold equipment. Typical downstream feeder installations may use copper or aluminium conductors within the manufacturer-listed wire range.
Why this product exists
This lug kit gives contractors a manufacturer-approved way to take power from a compatible load centre to a downstream panel. Compared with improvised field solutions, it helps maintain equipment compatibility and a cleaner installation.
Typical guidance: when feeding a subpanel, conductor size, overcurrent protection, and termination method must match the feeder design and local code. Actual installation requirements depend on panel rating, conductor type, temperature rating, and provincial or local electrical code.
Compared with similar products
Compared with a feeder breaker solution, a subfeed lug kit provides termination lugs rather than a branch overcurrent device in the accessory itself. Compared with universal aftermarket parts, this is a panel-specific accessory intended for listed use with compatible PowerMark Gold load centres.
Specifications
- Product type: Subfeed lug kit
- Amperage: 200A
- Poles: 2-pole
- Mounting: Plug-in
- System use: 1-phase load centre accessory
- Panel compatibility: PowerMark Gold load centres
- Conductor range: 1/0 AWG to 250 kcmil copper or aluminium
- Application: Feed a downstream subpanel or approved distribution equipment
- Brand: ABB
- Manufacturer part number: THLK2200
- BrandABB Electrification
- Warranty5 year
- Electrical
- Poles2 Pole
- Amps200A
- Physical
- MountingPush on
- Breaker TypeStandard
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 4
- Edmonton Stock: 42
