- Edmonton Stock: 3
:
from
to
Clear
Clear
Bathroom Exhaust Fan · 80 CFM, 0.7 Sones · CleanCover Grille, ENERGY STAR · Broan AE80K
SKU: AE-80K
80 CFM bathroom exhaust fan with 0.7 sones operation, CleanCover grille, and 4 in (102 mm) duct connection for quiet residential bath ventilation. Commonly used for small to mid-size bathrooms; typical sizing guidance is about 1 CFM per sq ft, but actual ventilation needs depend on room layout, moisture load, and local code.
Delivered to you by Aug 15 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This ceiling-mounted bathroom exhaust fan is designed to remove humidity and stale air from residential bathrooms and similar small washroom spaces. It delivers 80 CFM airflow with low 0.7 sone sound output for quieter day-to-day ventilation.
Use for
Use for standard bathroom exhaust applications where a 4 in (102 mm) duct is planned and quiet operation matters. It is suitable for insulated ceilings and may be installed over a bathtub or shower when connected to a GFCI-protected circuit, in accordance with the manufacturer listing and local electrical code.
Avoid for
Avoid using this fan where higher airflow is required for larger bathrooms, long duct runs, or heavy moisture loads without confirming the ventilation design. Do not use it as a kitchen exhaust fan or for hazardous or corrosive air streams.
Best for
Best for residential new construction, renovations, and contractor replacements where you need a compact, ENERGY STAR certified bath fan with a low-profile CleanCover grille. It is a practical choice for small to mid-size bathrooms where quieter operation is preferred.
Installed in
Typically installed in bathroom ceilings with 2 x 6 framing and connected to 120V branch power and 4 in (102 mm) round ductwork. The galvanized steel housing is intended for ceiling installation in insulated assemblies where permitted by code and manufacturer instructions.
Why this product exists
This model is built for contractors and homeowners who need code-conscious bathroom ventilation without the higher sound levels of basic economy fans. The CleanCover grille is intended to reduce visible dust collection compared with more traditional slotted grilles, helping simplify maintenance.
Compared with similar products
Compared with louder entry-level bath fans, this unit offers quieter 0.7 sone performance and ENERGY STAR certification. Compared with higher-CFM models, it is better suited to smaller spaces and standard residential bathrooms rather than oversized ensuites. As a typical rule of thumb, bathroom fan sizing often starts around 1 CFM per sq ft; actual performance depends on duct length, fittings, static pressure, room volume, and local code.
Specifications
- Brand: Broan
- Manufacturer part number: AE80K
- Product family: Flex Series
- Product type: Bathroom exhaust fan / ventilation fan
- Airflow: 80 CFM
- Sound level: 0.7 sones
- Duct size: 4 in (102 mm) round
- Voltage: 120V
- Current: 0.3A
- Power: 24.52W
- Certification: ENERGY STAR certified
- Housing material: 26-gauge galvanized steel
- Special feature: CleanCover grille
- Installation note: Suitable for use over tubs and showers on a GFCI-protected circuit, per listing and installation instructions
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 2
- Edmonton Stock: 901
- Edmonton Stock: 796
- Edmonton Stock: 720
- Edmonton Stock: 80
