How to Use Ouellet Heating Cables for Pipe Freeze Protection and Roof & Gutter De-Icing

Leave a reply

Introduction
Are freezing pipes or hazardous ice dams causing headaches during Canadian winters? Ouellet Heating Cables provide an efficient solution for preventing pipe freeze-ups and ensuring your roof and gutters stay free of ice. With easy installation and reliable performance, these cables are the ultimate cold-weather tool for electricians and homeowners alike. This guide will walk you through how to use these products effectively.

Why Choose Ouellet Heating Cables for Winter Protection?

Freezing pipes can burst, causing costly water damage, while ice dams on roofs can lead to leaks and structural issues. Ouellet heating cables, such as the ORF-P and ORF-R series, address these problems by maintaining critical areas at safe temperatures. These self-regulating cables provide energy efficiency, only increasing heat output when needed, and are easy to install.

Preventing Pipe Freezing with Heating Cables

Ouellet has a great offering of 120V plug-in pipe heating cable
Prevention pipe freeze this winter before its too late.

Selecting the Right Cable

  1. Identify Pipe Material and Size:Ouellet cables work on metallic and non-metallic pipes up to 3.8 cm (1.5 inches) in diameter. For pipes larger than this, contact technical support for guidance​​.
  2. Determine Cable Length: Use the manufacturer’s guide to select the appropriate cable length based on pipe diameter and insulation thickness​​.

Installation Steps:

  1. Prepare the Pipe: Clean the surface to remove debris and sharp edges. For plastic pipes, wrap with aluminum foil to improve heat distribution​.
  2. Attach the Cable: Lay the cable straight along the pipe’s length, avoiding overlaps. Secure it with thermal-resistant tape every 15 cm (6 inches)​.
  3. Insulate: Cover the pipe with up to 1.25 cm (0.5 inches) of fiberglass insulation to retain heat without risking overheating​.
  4. Connect Power: Plug into a grounded outlet with GFCI protection. Ensure the thermostat is placed on the pipe’s coldest end for optimal performance​.

Roof & Gutter De-Icing with Heating Cables

Roof and Gutter De-Icing cables can prevent this.

Planning the Installation

  1. Assess Problem Areas: Focus on areas prone to ice dams, such as valleys, dormers, and roof overhangs​​.
  2. Calculate Cable Length: Use a multiplier based on overhang depth and roof type (e.g., 2.5x for a 12-inch overhang on shingles)​​.

Installation Process:

  1. Install Clips and Spacers: Secure the cable in a zigzag pattern on the roof’s edge and valleys. Use clips every 91 cm (3 feet) and spacers in wide gutters​.
  2. Extend into Gutters and Downspouts: Route the cable along gutters and downspouts to ensure a clear drainage path for melted ice​.
  3. Test and Monitor: Before energizing, inspect the cable for damage. Use a ground fault circuit breaker to prevent electrical hazards​.

Why Buy from Evolt Electrical Supply?
Evolt Electrical Supply offers an extensive range of Ouellet heating cables at competitive prices, backed by our expert support team. By choosing Evolt, you’re not just purchasing quality products—you’re also gaining access to trusted guidance for every installation step. Create an account today and experience the Evolt advantage!

Prevent pipe freezing and eliminate ice dams with Ouellet Heating Cables. Learn how to install these reliable solutions for winter protection in our step-by-step guide.