Pilot Light · 24V AC/DC Green LED · 22 mm Panel Mount · Noark Electrical EX9PBV63D
What this product is for
The Noark Electrical EX9PBV63D is a green LED pilot light for industrial control panels, machine stations, and enclosure doors where operators need a clear visual indication of power, run, ready, or status conditions. It is designed for 24V AC/DC control circuits and fits standard 22 mm operator openings.
Use for
- Automation panels and OEM control assemblies
- Machine control stations and operator interfaces
- Power distribution and control enclosures
- Status indication for run, on, ready, or normal conditions
Avoid for
- Applications requiring a sealed washdown or outdoor-rated pilot device unless the enclosure provides the required protection
- Circuits outside the listed 24V AC/DC lamp voltage
- Applications where a maintained or momentary pushbutton is required instead of an indicator light
Best for
Best for electricians and panel builders standardizing on 22 mm pilot devices in industrial and light commercial control panels. Green indication is typically used for normal, run, or safe operating status, but final colour use should follow the machine design and local code requirements.
Installed in
Typically installed in panel doors, control stations, machinery cabinets, and fabricated operator stations with a 22 mm (approximately 7/8 in) mounting opening. A common listing shows a 22.5 mm mounting hole, which aligns with standard 22 mm pilot device layouts.
Why this product exists
This product provides a simple visual status point in low-voltage control circuits without needing a full pushbutton operator. LED indication reduces relamping frequency compared with older lamp styles and is commonly used where long service life and low control power draw are preferred.
Compared with similar products
Compared with illuminated pushbuttons, this pilot light is intended for indication only rather than operator input. Compared with larger 30 mm pilot devices, 22 mm devices are commonly chosen where panel space is limited and standard IEC operator hardware is preferred. If your design needs switching contacts such as 1NO+1NC, verify whether that requirement applies to a separate pushbutton assembly rather than this indicator light model.
Specifications
- Manufacturer part number: EX9PBV63D
- Brand: Noark Electrical
- Series / family: Ex9PB
- Product type: LED indicator pilot light
- Indicator colour: Green
- Lamp voltage: 24V AC/DC
- Mounting size: 22 mm (approximately 7/8 in)
- Typical mounting hole: 22.5 mm (approximately 0.89 in)
- Operator style: Round flat
- Degree of protection: IP40
- Rated insulation voltage (Ui): 415V
- Referenced standard: IEC/EN 60947-5-1
Buying note: 22 mm pilot devices are commonly selected to match standard IEC control hardware already used in the panel. Actual suitability depends on enclosure rating, circuit design, and local electrical code.
- Button ColourGreen
- Button Size22mm
- IP RatingIP65
- Operating modePilot Light
- Rated operating voltage24Vac/dc
- Compliant with standard(s)UL Listed (File Number E353865)
CSA
IEC/EN 60947
VDE 0660
CE compliant
RoHS compliant - BrandNoark Electrical
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.